PB1 zone, Vaughan: Parkway Belt Public Use Zone
Part 13, Section 13.2, Table 13-2; Section 13.3, Table 13-3 of the City of Vaughan Zoning By-law 001-2021.
A zone within the Parkway Belt corridor reserved for public uses and passive recreation, with large 15 m setbacks on all sides, buildings no taller than 11 m and lot coverage capped at 20%.
Is a property in the PB1 zone? Enter its address and the lookup returns the zone and these standards, including any site-specific exception.
Check an addressWhat the PB1 zone permits
- Passive recreational use
- Public uses
Standards
| Requirement | By-law |
|---|---|
| Minimum lot area (interior lot) | No requirement |
| Minimum lot width (interior lot) | 20 m |
| Minimum front yard | 15 m |
| Minimum interior side yard | 15 m |
| Minimum exterior side yard | 15 m |
| Minimum rear yard | 15 m |
| Maximum building height | 11 m |
| Maximum lot coverage | 20 % |
Other provisions in this section
- Minimum landscape strip abutting a street line: no requirement stated ('-') in Table 13-3.
- Minimum landscape strip along any interior side lot line or rear lot line abutting a Residential Zone or the Open Space Zone: no requirement stated ('-') in Table 13-3.
- Only two uses are permitted in PB1 (passive recreational use and public uses); all other Table 13-2 uses, including single detached dwellings, retail, restaurants, schools and places of worship, are not permitted.
- Additional requirements 1-3 to Table 13-2 (Part 5 specific use provisions; 500.0 m2 retail/restaurant cap; Future Development Zone note) attach to uses or zones other than those permitted in PB1 and do not apply to this zone's column.
- General Provisions (Part 4) and Parking, Loading and Stacking Requirements (Part 6) apply in addition to the zone standards.
Source: Part 13, Section 13.2, Table 13-2; Section 13.3, Table 13-3, By-law 001-2021 (City of Vaughan), checked 2026-09-12. General provisions elsewhere in the by-law (parking, driveways, accessory buildings) also apply, and a numbered exception on the parcel can change any value here. Treat this as a pre-check, not a sign-off.